Smith Millpond Dam Reservoir Report

Last Updated: December 5, 2025

Smith Millpond Dam in Marion, South Carolina is a vital water resource structure with a storage capacity of 80 acre-feet and a normal storage level of 50 acre-feet.


°F

°F

mph

Wind

%

Humidity

Summary

The dam stands at a height of 8 feet and covers a surface area of 25 acres. Despite its importance, the dam's hazard potential is currently classified as 'Undetermined' with a condition assessment of 'Not Rated', indicating a need for further evaluation and monitoring.

Located at coordinates 34.0673 latitude and -79.3446 longitude, Smith Millpond Dam is not regulated by the state and has no associated structures or inspection history available. The dam's emergency action plan status is not specified, raising potential concerns about preparedness for unforeseen events. With its condition assessment not rated and hazard potential undetermined, there is a need for increased attention to the maintenance and safety of this essential water resource infrastructure.

Water resource and climate enthusiasts should take note of Smith Millpond Dam as a critical structure in Marion, South Carolina. The dam's storage capacity and surface area make it a significant asset for the region, but its current condition assessment and hazard potential status highlight the importance of regular monitoring and maintenance to ensure the safety and integrity of this essential water resource infrastructure.

Dam Height

8

Surface Area

25

Nid Storage

80

Hazard Potential

Undetermined

Nid Height

8
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.