Williams Dam Reservoir Report
Nearby: Reaser Stock Dam Bogner Dam
Last Updated: December 6, 2025
Williams Dam, located in Fall River, South Dakota, is a state-owned structure built in 1935 for the primary purpose of water resource management.
°F
°F
mph
Wind
%
Humidity
Summary
This earthen dam stands at a height of 15 feet and spans 750 feet across the tributary of Horsehead Creek, providing a maximum storage capacity of 135 acre-feet. Despite its low hazard potential, the dam has not been rated for its condition as of the last inspection in 2011.
With a state regulatory agency overseeing its permitting, inspection, and enforcement, Williams Dam serves as a vital component in the water infrastructure of the region. Its strategic location and design contribute to flood control and water storage capabilities, ensuring the efficient management of the surrounding drainage area. As climate change continues to impact water resources, the maintenance and upkeep of dams like Williams Dam are essential for safeguarding communities and ecosystems in the face of evolving environmental challenges.
Year Completed |
1935 |
Dam Length |
750 |
Dam Height |
15 |
River Or Stream |
TRIBUTARY HORSEHEAD CREEK |
Primary Dam Type |
Earth |
Hydraulic Height |
15 |
Nid Storage |
135 |
Hazard Potential |
Low |
Nid Height |
15 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Williams Dam