King Reservoir Report

Last Updated: December 6, 2025

King is a privately owned earth dam located in Chester, Tennessee, along Clover Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1972, this dam stands at a structural height of 21.3 feet and has a hydraulic height of 17.6 feet. With a storage capacity of 80 acre-feet, King serves as a low hazard potential structure with a moderate risk assessment rating of 3.

Despite not being state regulated or permitted, King has not been inspected since November 2019 and is currently rated as "Not Rated" in terms of its condition assessment. The dam's spillway is uncontrolled and has a length of 550 feet, with a surface area of 7.4 acres and a drainage area of 0.1 square miles. Located within the Memphis District, King does not have any associated locks or outlet gates.

While King may not be subject to frequent inspections or state regulations, its presence along Clover Creek poses a moderate risk in the event of a potential failure. Water resource and climate enthusiasts may find interest in further monitoring and assessment of King to ensure its safety and stability in the face of changing environmental conditions.

Year Completed

1972

Dam Length

550

River Or Stream

CLOVER CREEK

Primary Dam Type

Earth

Surface Area

7.4

Hydraulic Height

17.6

Drainage Area

0.1

Nid Storage

80

Structural Height

21.3

Outlet Gates

None

Hazard Potential

Low

Nid Height

21
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.