Rowe Reservoir Report

Last Updated: December 13, 2025

Rowe is a private earth dam located in Shelby, Tennessee, along the Tribbig Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1963, it stands at a structural height of 19 feet and has a hydraulic height of 15.5 feet. The dam has a storage capacity of 99 acre-feet and covers a surface area of 13 acres, serving a drainage area of 0.32 square miles. With a low hazard potential and a moderate risk assessment rating, Rowe is a significant water resource structure in the region.

Despite being privately owned and not regulated by the state, Rowe plays a crucial role in water management and flood control. The dam, with an uncontrolled spillway type, is designed to protect the surrounding area from excessive water flow and potential inundation. While its condition assessment is currently not rated, regular inspections are conducted every five years to ensure its structural integrity and safety.

Situated in the Memphis District, Rowe is a key component in the local water infrastructure. With its strategic location and moderate risk level, the dam serves as a vital resource for the community, highlighting the importance of sustainable water resource management practices in the face of changing climate conditions.

Year Completed

1963

Dam Length

275

River Or Stream

TRIBBIG CREEK

Primary Dam Type

Earth

Surface Area

13

Hydraulic Height

15.5

Drainage Area

0.32

Nid Storage

99

Structural Height

19

Outlet Gates

None

Hazard Potential

Low

Nid Height

19
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.