Logue Road Stp Reservoir Report

Last Updated: December 11, 2025

Logue Road Stp is a significant water resource structure located in Wilson, Tennessee, along the Anthony Branch river.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 2007, this earth dam stands at 15 feet tall and spans 2100 feet in length, with a storage capacity of 159 acre-feet. The dam serves various purposes, including flood control and water storage, with a normal storage capacity of 140 acre-feet and a surface area of 12.3 acres.

Designed by Robert Pickney, Logue Road Stp is under the ownership of a public utility in Tennessee and falls under the jurisdiction of the state with no federal regulation. Although the dam is not currently rated for its condition, its hazard potential is considered significant, with a moderate risk assessment. Despite being uncontrolled, the spillway type is designed to manage any excess water flow effectively. With an inspection frequency of 5 years, Logue Road Stp remains a vital structure for water management in the region, with its notable location and purpose contributing to its importance in the local water resource and climate landscape.

Year Completed

2007

Dam Length

2100

River Or Stream

ANTHONY BRANCH

Primary Dam Type

Earth

Surface Area

12.3

Hydraulic Height

13.5

Drainage Area

0.02

Nid Storage

159

Structural Height

15

Outlet Gates

None

Hazard Potential

Significant

Nid Height

15
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.