Elm Fork Ws Scs Site 6n Dam Reservoir Report

Last Updated: December 5, 2025

Elm Fork WS SCS Site 6n Dam, located in Cooke, Texas, is a vital structure designed by the USDA NRCS to serve as a flood risk reduction measure along the TR-Elm Fork Trinity River.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1956, this earth dam stands at a height of 43 feet and stretches for 1100 feet, providing a storage capacity of 415 acre-feet for irrigation purposes. Despite its age, the dam remains state-regulated, inspected, and enforced by the TCEQ, ensuring its continued functionality and safety.

With a hazard potential not available and a condition assessment not rated, Elm Fork WS SCS Site 6n Dam poses a high risk level, indicating the need for careful monitoring and risk management measures. The dam lacks a spillway and features one outlet gate, underscoring the importance of proper maintenance and emergency preparedness. While the exact condition assessment date and inspection frequency are not specified, the dam's state jurisdiction and regulatory oversight suggest a commitment to safeguarding this critical infrastructure.

Enthusiasts of water resources and climate will find Elm Fork WS SCS Site 6n Dam a noteworthy case study in flood risk reduction and irrigation infrastructure management. As part of the broader network of dams and water control structures in Texas, this dam showcases the collaboration between local government and federal agencies in ensuring water resource sustainability and disaster resilience in the face of changing climate patterns.

Year Completed

1956

Dam Length

1100

Dam Height

43

River Or Stream

TR-ELM FORK TRINITY RIVER

Primary Dam Type

Earth

Surface Area

8.6

Hydraulic Height

43

Drainage Area

0.73

Nid Storage

415

Structural Height

43

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

43
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.