Bitch Creek Lake Dam Reservoir Report

Last Updated: December 5, 2025

Bitch Creek Lake Dam, located in Wilbarger, Texas, was completed in 1926 and stands at a height of 14 feet with a length of 1459 feet.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam, with a buttress core type, serves a primary purpose of "Other," with a storage capacity of 369 acre-feet. The dam is situated on Bitch Creek and is managed by a private owner, with state permitting and inspection in place.

Although the dam has not been rated for its condition, it has a high risk assessment level of 2. With no spillway and a hazard potential that is not available, the dam poses a potential risk to the surrounding area in case of failure. Despite being last inspected in 1982, there is no information on the inspection frequency or emergency action plan preparedness, showcasing potential gaps in monitoring and response protocols.

Given its age and the lack of recent assessment data, it is important for water resource and climate enthusiasts to advocate for updated inspections and risk management measures for Bitch Creek Lake Dam. The potential consequences of a dam failure on Bitch Creek underscore the need for proactive measures to ensure the safety and resilience of the surrounding community and ecosystem.

Year Completed

1926

Dam Length

1459

Dam Height

14

River Or Stream

BITCH CREEK

Primary Dam Type

Earth

Hydraulic Height

14

Nid Storage

369

Structural Height

14

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

14
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.