Dam Report

Brady Creek Ws Scs Site 31 Dam dam

Texas, USA Brady Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
50ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Brady Creek Ws Scs Site 31 Dam -- None dam
Brady Creek Ws Scs Site 31 Dam None · Brady Creek
About this dam

Brady Creek Ws Scs Site 31 Dam

Brady Creek WS SCS Site 31 Dam, located in Concho County, Texas, is a crucial infrastructure designed by the USDA NRCS to mitigate flood risks along Brady Creek. Completed in 1958, this earth dam stands at a height of 50 feet and spans a length of 5910 feet, providing a storage capacity of 11,715 acre-feet. Despite its age, the dam is maintained and regulated by the Texas Commission on Environmental Quality (TCEQ) to ensure its structural integrity and operational efficiency.

The primary purpose of Brady Creek WS SCS Site 31 Dam is flood risk reduction, serving the local community and surrounding areas by managing water flow during heavy rainfall events. With a drainage area of 22.5 square miles, the dam plays a crucial role in safeguarding the region from potential inundation and property damage. While lacking a spillway, the dam is equipped with a slide gate for controlled water release in case of emergency situations.

Although the dam's hazard potential and condition assessment are not readily available, it is reassuring to know that the risk management measures are in place to address any potential issues. With high-risk assessment categorization, the authorities are likely to prioritize monitoring and maintenance activities to ensure the safety and efficiency of Brady Creek WS SCS Site 31 Dam for the foreseeable future.

StateNone
River / streamBrady Creek
NID IDTX01625
Owner typeLocal Government
Primary purposeFlood Risk Reduction
Dam typeEarth
Year built1958
Dam height50 ft
Dam length5,910 ft
Max storage11,715 AF
Normal storage189 AF
Drainage area22.5 sq mi
Hazard potentialNot Available
ConditionNot Rated
Last inspectionFri, 24 May 2013 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Brady Creek Ws Scs Site 31 Dam -- inflows here typically show up in storage 24-72 hours later.

Track Brady Creek Ws Scs Site 31 Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Brady Creek Ws Scs Site 31 Dam

Where does the data for Brady Creek Ws Scs Site 31 Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.