Cummins Creek Ws Scs Site 10 Dam Reservoir Report

Last Updated: December 5, 2025

Cummins Creek WS SCS Site 10 Dam, located in Fayette County, Texas, is a vital structure designed by USDA NRCS to address flood risk reduction along Shaw Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1959, the earth dam stands at a height of 35 feet with a length of 3420 feet, providing a storage capacity of 4280 acre-feet. The dam serves as a crucial infrastructure for managing water resources in the region, with a primary purpose of flood risk reduction.

Managed by the local government and regulated by the Texas Commission on Environmental Quality (TCEQ), the Cummins Creek WS SCS Site 10 Dam is a key component in the watershed's flood control strategy. Despite its high hazard potential, the dam has not been rated for its condition assessment, emphasizing the need for regular inspections and risk management measures. While the dam does not have a spillway, it features one outlet gate for water release when necessary.

Water resource and climate enthusiasts can appreciate the significance of the Cummins Creek WS SCS Site 10 Dam in safeguarding the community against flooding events. With its strategic location and design, the dam plays a crucial role in protecting the surrounding area from potential water-related hazards. As efforts continue to ensure its proper maintenance and inspection, the dam remains a critical asset in water resource management in Fayette County, Texas.

Year Completed

1959

Dam Length

3420

Dam Height

35

River Or Stream

SHAW CREEK

Primary Dam Type

Earth

Surface Area

41.6

Hydraulic Height

35

Drainage Area

6.06

Nid Storage

4280

Structural Height

35

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

35
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.