Welder Lake No 6 Dam Reservoir Report

Last Updated: December 5, 2025

Welder Lake No 6 Dam, located in La Salle, Texas, is a privately owned structure built in 1944 for the primary purpose of water supply.


°F

°F

mph

Wind

%

Humidity

Summary

This Earth-type dam stands at a height of 11 feet with a length of 1575 feet, providing a storage capacity of 880 acre-feet. The dam, situated on TR-Sauz Creek, is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular inspections, enforcement, and permitting by the state agency.

Although the dam has no spillway and a hazard potential that is not available, it is deemed to have a high risk level. The condition assessment of Welder Lake No 6 Dam is not rated, but it meets the guidelines for emergency action plans. With no associated structures and only one outlet gate, this dam serves as a vital water resource in the region. For water resource and climate enthusiasts, Welder Lake No 6 Dam presents an intriguing case study in dam management and regulation, showcasing the importance of maintaining and monitoring such critical infrastructure for water supply purposes.

Year Completed

1944

Dam Length

1575

Dam Height

11

River Or Stream

TR-SAUZ CREEK

Primary Dam Type

Earth

Surface Area

51

Hydraulic Height

11

Nid Storage

880

Structural Height

11

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

11
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.