Dam Report

Hugh Lilly Lake Dam dam

Texas, USA Tr-Mulberry Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
15ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Hugh Lilly Lake Dam -- None dam
Hugh Lilly Lake Dam None · Tr-Mulberry Creek
About this dam

Hugh Lilly Lake Dam

Hugh Lilly Lake Dam, located in Taylor, Texas, serves primarily for irrigation purposes and was completed in 1966. This private Earth dam stands at a height of 15 feet with a structural height of 18 feet and a length of 615 feet. The dam has a storage capacity of 230 acre-feet, with a normal storage level of 150 acre-feet.

The dam, situated on TR-Mulberry Creek, is owned privately and is not regulated by the state. It poses a high risk due to its hazard potential not being available and is not currently rated for its condition assessment. Despite lacking a spillway, this dam plays a crucial role in providing water for irrigation in the region, highlighting the importance of monitoring and maintaining its structural integrity to ensure water resource sustainability and climate resilience.

As water resource and climate enthusiasts, understanding the significance of Hugh Lilly Lake Dam in providing water for irrigation, stock, and fire protection purposes underscores the need for continued inspection and potential risk management measures to mitigate any unforeseen hazards. With its location in the Fort Worth District and the involvement of key stakeholders such as the primary owner and state permitting agencies, it is essential to prioritize the safety and functionality of this crucial water infrastructure for the benefit of the surrounding community and the environment.

StateNone
River / streamTr-Mulberry Creek
NID IDTX02709
Owner typePrivate
Primary purposeIrrigation
Dam typeEarth
Year built1966
Dam height15 ft
Dam length615 ft
Max storage230 AF
Normal storage150 AF
Hazard potentialNot Available
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Hugh Lilly Lake Dam -- inflows here typically show up in storage 24-72 hours later.

Track Hugh Lilly Lake Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Hugh Lilly Lake Dam

Where does the data for Hugh Lilly Lake Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.