Stoneham Lake Dam Reservoir Report

Last Updated: December 5, 2025

Stoneham Lake Dam, located in Dobbins, Texas, along TR-Caney Creek, was completed in 1955 by the USDA NRCS.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam serves the primary purpose of flood risk reduction, with additional benefits such as debris control, recreation, and water supply. Standing at a height of 24 feet and a length of 1038 feet, the earth dam has a storage capacity of 275 acre-feet, with a normal storage level of 160 acre-feet covering a surface area of 20 acres.

Despite not being state regulated, Stoneham Lake Dam is subject to state permitting and inspection requirements. The dam, constructed with a buttress core type on an unlisted/unknown foundation, lacks a spillway and is equipped with one outlet gate. With a high risk assessment rating of 2, the dam's condition assessment is currently not rated, and emergency action plans and inundation maps are not available. The dam's hazard potential and risk management measures are also not specified, highlighting the need for further assessment and planning to ensure the safety and stability of the structure for the surrounding community and environment.

Year Completed

1955

Dam Length

1038

Dam Height

24

River Or Stream

TR-CANEY CREEK

Primary Dam Type

Earth

Surface Area

20

Hydraulic Height

24

Nid Storage

275

Structural Height

24

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

24
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.