Florey Lake Dam Reservoir Report

Last Updated: December 5, 2025

Located in Kilgore, Texas, Florey Lake Dam stands as a testament to engineering excellence, having been completed in 1954 by the renowned Stroud Brothers of Henderson, TX.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam, nestled on TR-Wilds Creek in Rusk County, serves primarily for recreational purposes, offering a tranquil oasis for water resource and climate enthusiasts alike. With a height of 41 feet and a length of 650 feet, it boasts a storage capacity of 469 acre-feet and a surface area of 22 acres, making it an ideal spot for outdoor activities and wildlife observation.

Despite its age, Florey Lake Dam has stood the test of time, with a moderate risk assessment rating of 3. The dam features an uncontrolled spillway and two outlet gates, ensuring efficient water flow and management. While not currently regulated by the state, the dam undergoes regular inspections to ensure its structural integrity and safety. With its picturesque surroundings and rich history, Florey Lake Dam is a must-visit destination for those seeking to explore the intersection of water resources and climate in the heart of Texas.

Year Completed

1954

Dam Length

650

Dam Height

41

River Or Stream

TR-WILDS CREEK

Primary Dam Type

Earth

Surface Area

22

Hydraulic Height

41

Drainage Area

0.57

Nid Storage

469

Structural Height

41

Outlet Gates

Uncontrolled - 2

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

41
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.