Sanders Lake Dam Reservoir Report

Last Updated: December 5, 2025

Sanders Lake Dam, located in Harrison County, Texas, is a private dam built in 1962 by the USDA NRCS for water supply purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam stands at a height of 12 feet and has a length of 800 feet, with a storage capacity of 85 acre-feet. Despite its relatively small size, the dam plays a crucial role in providing water to the surrounding area, particularly in times of drought.

The dam, situated on Beckum Creek, is classified as an earth dam with a buttress core type. It does not have a spillway and is not regulated by the state. Although the dam's hazard potential is listed as "Not Available," its risk assessment is deemed high. With no recent inspection or assessment data available, the condition of the dam remains unknown. Given its importance for water supply, it is crucial for stakeholders to ensure the safety and maintenance of Sanders Lake Dam to prevent any potential risks and ensure the continuous supply of water to the community.

Year Completed

1962

Dam Length

800

Dam Height

12

River Or Stream

BECKUM CREEK

Primary Dam Type

Earth

Hydraulic Height

12

Nid Storage

85

Structural Height

12

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.