Ferguson Lake Dam Reservoir Report

Last Updated: December 5, 2025

Ferguson Lake Dam, located in Upshur, Texas, is a privately owned structure built in 1962 primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

This Earth dam stands at a height of 10 feet, with a length of 450 feet, and a capacity of 100 acre-feet. Situated on TR-Sandy Creek, the dam provides a surface area of 15 acres for water enthusiasts to enjoy.

Despite its small size, Ferguson Lake Dam poses a high risk (2) and has not been rated for its condition. The dam does not have a spillway, but is equipped with one outlet gate. While it is not regulated by the state, it undergoes regular inspections and is permitted for operation. The surrounding area does not have designated inundation maps, emergency action plans, or updated hazard potential assessments.

For water resource and climate enthusiasts, Ferguson Lake Dam presents an interesting case study in recreational dam construction and management. With its modest size and potential risks, this structure highlights the importance of ongoing monitoring and assessment to ensure the safety and sustainability of water resources in the region.

Year Completed

1962

Dam Length

450

Dam Height

10

River Or Stream

TR-SANDY CREEK

Primary Dam Type

Earth

Surface Area

15

Hydraulic Height

10

Nid Storage

100

Structural Height

10

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

10
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.