Jack Spray Lake Dam Reservoir Report

Last Updated: December 19, 2025

Jack Spray Lake Dam in Motley, Texas, is a private Earth-type dam that was completed in 1964 for the primary purpose of water supply.


°F

°F

mph

Wind

%

Humidity

Summary

This dam sits on the Tom Handle Creek and has a height of 25 feet and a length of 550 feet, with a storage capacity of 210 acre-feet. Despite its age, the dam has not been rated for its condition and has a high risk assessment level of 2.

The dam does not have a spillway and is not regulated by the state, but it does have state permitting and inspection in place. The last inspection was conducted in September 1992, and the dam has not been modified in recent years. With its hazard potential not available, the risk management measures for Jack Spray Lake Dam are currently unspecified. Despite these uncertainties, the dam remains a crucial source of water supply in the region and a point of interest for water resource and climate enthusiasts.

Year Completed

1964

Dam Length

550

Dam Height

25

River Or Stream

TOM HANDLE CREEK

Primary Dam Type

Earth

Surface Area

13

Hydraulic Height

25

Nid Storage

210

Structural Height

25

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.