Brewer Lake Dam Reservoir Report
Last Updated: December 20, 2025
Brewer Lake Dam, located in Sherman, Texas, was completed in 1972 with a primary purpose of water supply.
°F
°F
mph
Wind
%
Humidity
Summary
This Earth-type dam stands at 22 feet high and stretches 463 feet in length, with a storage capacity of 72 acre-feet. The dam is owned and designed by the USDA's Natural Resources Conservation Service and is not regulated by the state of Texas.
The dam, situated on TR-Coldwater Creek, serves as a vital resource for the local community, providing water supply and other essential functions. Despite its high hazard potential and lack of a spillway, Brewer Lake Dam has not been rated for its condition assessment. With a risk assessment rating of 'High (2)', it is essential to monitor and maintain this critical infrastructure to ensure the safety and reliability of the water resource it provides. The dam's location and design make it a point of interest for water resource and climate enthusiasts, highlighting the importance of sustainable water management practices in the region.
Year Completed |
1972 |
Dam Length |
463 |
Dam Height |
22 |
River Or Stream |
TR-COLDWATER CREEK |
Primary Dam Type |
Earth |
Surface Area |
11 |
Hydraulic Height |
22 |
Nid Storage |
72 |
Structural Height |
22 |
Outlet Gates |
None - 1 |
Hazard Potential |
Not Available |
Foundations |
Unlisted/Unknown |
Nid Height |
22 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Palo Duro Ck Nr Spearman
|
0cfs |
Big Blue Ck Nr Fritch
|
1cfs |
Canadian Rv Nr Amarillo
|
28cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Brewer Lake Dam