Emil Bayer Lake Dam Reservoir Report

Last Updated: December 11, 2025

Emil Bayer Lake Dam, located in Kinney County, Texas, was completed in 1943 and serves as a crucial water supply structure for the area.


°F

°F

mph

Wind

%

Humidity

Summary

Standing at a height of 12 feet and stretching 400 feet in length, this earth dam on Tequesquite Creek provides a storage capacity of 149 acre-feet. Despite not having a spillway, the dam plays a vital role in water management and distribution in the region.

Owned privately, Emil Bayer Lake Dam is not regulated by the state but undergoes regular inspections and permitting processes. With a primary purpose of water supply, this dam has a high hazard potential and a risk assessment rating of 2. Although the condition of the dam is not rated, it is clear that maintenance and monitoring are key priorities to ensure the safety and efficiency of this essential water resource infrastructure.

As water resource and climate enthusiasts, the Emil Bayer Lake Dam presents an intriguing case study in the management of water supply infrastructure. With its historical significance, structural design, and risk assessment profile, this dam serves as a focal point for understanding the complexities and challenges of maintaining and operating critical water resources in a changing climate.

Year Completed

1943

Dam Length

400

Dam Height

12

River Or Stream

TEQUESQUITE CREEK

Primary Dam Type

Earth

Surface Area

12

Hydraulic Height

12

Nid Storage

149

Structural Height

12

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.