Lake Warrior Dam Reservoir Report

Last Updated: December 5, 2025

Located in Fayette, Texas, the Lake Warrior Dam is a private-owned structure designed by G.W.


°F

°F

mph

Wind

%

Humidity

Summary

Thompson and completed in 1973. This Earth-type dam serves primarily for recreational purposes, with a height of 22 feet and a length of 365 feet. The dam has a storage capacity of 69 acre-feet and covers a surface area of 7.2 acres, drawing water from TR-Miller Creek.

Although not regulated by the state, the Lake Warrior Dam boasts a moderate risk assessment level and features an uncontrolled spillway with a width of 20 feet. Despite its age, the dam has not been rated for its condition, and its last inspection was conducted in 2010. With a capacity for 662 cubic feet per second discharge and three uncontrolled outlet gates, the Lake Warrior Dam remains an important feature in the region for water resource and climate enthusiasts to explore and appreciate.

Year Completed

1973

Dam Length

365

Dam Height

22

River Or Stream

TR-MILLER CREEK

Primary Dam Type

Earth

Surface Area

7.2

Hydraulic Height

22

Drainage Area

0.05

Nid Storage

69

Structural Height

22

Outlet Gates

Uncontrolled - 3

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

22
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.