Town Creek Dam No 4 Reservoir Report

Last Updated: December 20, 2025

Town Creek Dam No 4, located in Kerrville, Texas, was completed in 1961 and serves as a recreational and water supply resource in the area.


°F

°F

mph

Wind

%

Humidity

Summary

The dam is privately owned and stands at a height of 25.2 feet, with a structural height of 20 feet. With a storage capacity of 173 acre-feet, the dam plays a crucial role in managing water resources in the region.

Despite being a vital asset for water supply and recreation, Town Creek Dam No 4 has not been rated for its condition and has a high risk potential. The dam does not have a spillway and is equipped with one outlet gate. The last inspection was conducted in May 1991, indicating a need for updated assessments and risk management measures to ensure the safety and efficiency of the structure.

While the dam does not fall under the jurisdiction of state regulation, it is subject to state permitting and inspection. With a risk assessment categorizing it as high risk, there is a pressing need for enhanced monitoring and evaluation of Town Creek Dam No 4 to safeguard its integrity and prevent potential hazards in the future.

Year Completed

1961

Dam Length

500

Dam Height

25.2

River Or Stream

TOWN CREEK

Primary Dam Type

Earth

Hydraulic Height

20

Nid Storage

173

Structural Height

20

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.