Alton Lake Dam Reservoir Report

Last Updated: December 6, 2025

Alton Lake Dam, located in Leon County, Texas, is a private earth dam completed in 1977 with a primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

The dam spans 750 feet in length and stands at a height of 32 feet, with a storage capacity of 358 acre-feet. Situated on Hale Branch, the dam is designed as a buttress type structure and is not regulated by the state. Despite its high hazard potential, the dam is currently rated as "Not Available" in terms of hazard potential and "Not Rated" in condition assessment.

While Alton Lake Dam presents a risk assessment of "High (2)", it lacks crucial emergency preparedness measures such as an Emergency Action Plan (EAP) and updated inundation maps. The dam is not under the jurisdiction of any federal agency and does not have any associated structures or federal fundings. With its solitary outlet gate and absence of a spillway, there are limitations in the dam's capacity to manage high discharge events. Although the dam is not currently rated for condition, its risk profile suggests a need for enhanced risk management measures to ensure the safety of the surrounding community and water resources.

Year Completed

1977

Dam Length

750

Dam Height

32

River Or Stream

HALE BRANCH

Primary Dam Type

Earth

Hydraulic Height

32

Nid Storage

358

Structural Height

32

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

32
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.