Rock Springs Tank Dam Reservoir Report

Last Updated: December 19, 2025

Rock Springs Tank Dam, located in Oldham, Texas, is a privately owned Earth dam that was completed in 1960.


°F

°F

mph

Wind

%

Humidity

Summary

With a structural height of 35 feet and a length of 610 feet, this dam serves the primary purpose of providing storage for Rock Springs Creek. It has a normal storage capacity of 238 acre-feet and a maximum storage capacity of 476 acre-feet, making it vital for water resource management in the area.

Despite being privately owned, Rock Springs Tank Dam is subject to state permitting and inspection requirements. It lacks a spillway and has no associated locks, but features a single outlet gate. The dam is classified as having a high risk potential, emphasizing the importance of regular maintenance and monitoring to ensure its structural integrity and prevent any potential hazards to the surrounding area. For water resource and climate enthusiasts, this dam serves as a significant infrastructure element in the region, contributing to water storage and management efforts along Rock Springs Creek.

Year Completed

1960

Dam Length

610

Dam Height

35

River Or Stream

ROCK SPRINGS CREEK

Primary Dam Type

Earth

Surface Area

17

Hydraulic Height

35

Nid Storage

476

Structural Height

35

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

35
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.