Dam Report

Locke Dam 1 dam

Texas, USA Tr-Bluff And Red Deer Creeks Hazard Not Available
Today high
--
Tonight low
--
Dam height
26ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Locke Dam 1 -- None dam
Locke Dam 1 None · Tr-Bluff And Red Deer Creeks
About this dam

Locke Dam 1

Locke Dam 1, located in Miami, Texas, was completed in 1952 by the USDA NRCS and serves primarily for fire protection, stock, or small fish pond purposes. This private earth dam stands at a height of 26 feet and stretches 264 feet in length, with a storage capacity of 34 acre-feet. Situated on the TR-Bluff and Red Deer Creeks, this dam plays a crucial role in managing water resources in Roberts County, Texas.

Despite its modest size, Locke Dam 1 poses a high risk due to its lack of available hazard potential and condition assessment ratings. The dam does not have a spillway, and its outlet gates are limited to one. With no recent inspection or assessment data available, it is essential for water resource and climate enthusiasts to advocate for improved monitoring and maintenance practices to ensure the safety and efficiency of Locke Dam 1.

As a key structure in the Tulsa District, Locke Dam 1 highlights the importance of private dam ownership in water management efforts. With its location in a high-risk area and limited regulatory oversight, the dam serves as a reminder of the ongoing challenges in balancing water resource utilization and conservation. Continued advocacy and support for improved risk management measures are essential to safeguarding the surrounding community and environment from potential dam failure and water resource disruptions.

StateNone
River / streamTr-Bluff And Red Deer Creeks
NID IDTX06797
Owner typePrivate
Primary purposeFire Protection, Stock, Or Small Fish Pond
Dam typeEarth
Year built1952
Dam height26 ft
Dam length264 ft
Max storage34 AF
Normal storage22 AF
Drainage area840.0 sq mi
Hazard potentialNot Available
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Locke Dam 1 -- inflows here typically show up in storage 24-72 hours later.

Track Locke Dam 1 in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Locke Dam 1

Where does the data for Locke Dam 1 come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.