V Flowers Dam 1 Reservoir Report

Last Updated: December 5, 2025

V Flowers Dam 1, located in Canadian, Texas, was completed in 1970 and serves multiple purposes including fire protection, stock, and small fish pond management.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam, designed by USDA NRCS, stands at a height of 26 feet with a length of 1164 feet, offering a storage capacity of 56 acre-feet. The dam is situated on the TR-Washburn Arroyo, within the Tulsa District of Texas.

With no spillway and a hazard potential labeled as "Not Available," the dam's risk assessment categorizes it as high. Despite its condition being "Not Rated," the dam operates without state regulation, enforcement, or jurisdiction. The lack of state involvement raises questions about the dam's safety and maintenance protocols. As water resource and climate enthusiasts, it is crucial to monitor such structures for potential risks and ensure proper management to prevent any unforeseen disasters.

Year Completed

1970

Dam Length

1164

Dam Height

26

River Or Stream

TR-WASHBURN ARROYO

Primary Dam Type

Earth

Drainage Area

840

Nid Storage

56

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.