Terry Lake Dam Reservoir Report

Last Updated: December 5, 2025

Terry Lake Dam, located in Bryan, Texas, was completed in 2004 for the primary purpose of debris control.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam stands at a height of 17.5 feet and has a length of 990 feet, providing a storage capacity of 21 acre-feet. With a fair condition assessment as of November 2016, the dam has two uncontrolled outlet gates and a spillway width of 12 feet.

Managed by a private owner, Terry Lake Dam is not regulated by the state but undergoes regular inspections and permitting. Despite its moderate risk rating, the dam has not experienced any significant hazards thus far. The surrounding area has a drainage area of 0.03 square miles, emphasizing the importance of maintaining the dam for debris control and water resource management in the region. Enthusiasts of water resources and climate will find Terry Lake Dam an interesting structure with a vital role in the local ecosystem.

Year Completed

2004

Dam Length

990

Dam Height

17.5

River Or Stream

Primary Dam Type

Earth

Surface Area

3

Drainage Area

0.03

Nid Storage

21

Outlet Gates

Uncontrolled - 2

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

18
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.