Kings Mine Reservoir Dam Reservoir Report

Last Updated: December 25, 2025

Kings Mine Reservoir Dam, located in Morris County, Texas, is a private-owned earth dam with a height of 75 feet and a length of 1200 feet.


°F

°F

mph

Wind

%

Humidity

Summary

The dam's primary purpose is listed as "Other," with a storage capacity of 2100 acre-feet and a surface area of 37 acres. The dam is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular inspections, enforcement, and permitting processes.

Despite the lack of certain data such as the year of completion and dam volume, the dam's hazard potential is deemed "Not Available," and its condition assessment is listed as "Not Rated." The risk assessment for Kings Mine Reservoir Dam is classified as high, with a risk level of 2. Emergency action plans (EAP) and risk management measures for the dam are not currently listed, indicating potential areas for improvement in the future to enhance the dam's safety and resilience.

With its location on TR-Ellison Creek and under the jurisdiction of the Fort Worth District of the US Army Corps of Engineers, Kings Mine Reservoir Dam presents a unique opportunity for water resource and climate enthusiasts to explore the complexities of dam management and regulation. The dam's association with a high-risk rating and the absence of certain critical information suggest areas for further research and potential enhancements to ensure the safety and stability of the dam in the face of changing environmental conditions.

Dam Length

1200

Dam Height

75

River Or Stream

TR-ELLISON CREEK

Primary Dam Type

Earth

Surface Area

37

Hydraulic Height

75

Nid Storage

2100

Structural Height

75

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

75
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.