Dam Report

Hensarling Lake Dam dam

Texas, USA Hazard Not Available
Today high
--
Tonight low
--
Dam height
13ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Hensarling Lake Dam -- None dam
Hensarling Lake Dam None ·
About this dam

Hensarling Lake Dam

Hensarling Lake Dam, located in Henderson County, Texas, is a private-owned earth dam completed in 2008 with a primary purpose classified as "Other". Standing at a height of 13.3 feet and a length of 450 feet, the dam has a maximum storage capacity of 90 acre-feet and a normal storage capacity of 40 acre-feet. The dam also features an uncontrolled spillway with a width of 70 feet.

The dam is associated with two uncontrolled outlet gates and is subject to regular state inspections and permitting. While it is not regulated by the state, the dam has been assessed to have a moderate risk level. Despite lacking a hazard potential rating and condition assessment, Hensarling Lake Dam plays a crucial role in water resource management in the area and serves as a valuable asset for local water supply and conservation efforts.

Overall, Hensarling Lake Dam represents a significant piece of infrastructure in the region, contributing to water storage and management activities. Its completion in 2008 marked an important milestone in the area's water resource development, and its continued operation underscores the importance of efficient dam maintenance and risk management strategies in the face of changing climate conditions. Enthusiasts of water resources and climate science can appreciate the role that Hensarling Lake Dam plays in the local ecosystem and its impact on water availability and conservation efforts.

StateNone
River / stream
NID IDTX07318
Owner typePrivate
Primary purposeOther
Dam typeEarth
Year built2008
Dam height13 ft
Dam length450 ft
Max storage90 AF
Normal storage40 AF
Surface area9.0 ac
Hazard potentialNot Available
ConditionNot Rated
Last inspectionWed, 12 May 2010 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Hensarling Lake Dam -- inflows here typically show up in storage 24-72 hours later.

Track Hensarling Lake Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Hensarling Lake Dam

Where does the data for Hensarling Lake Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.