Yankee Meadow Reservoir Report

Last Updated: December 5, 2025

Yankee Meadow is a privately owned irrigation dam located in Iron County, Utah, along the Bowery Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1926, this earth dam stands at a height of 34 feet and has a hydraulic height of 30 feet. With a storage capacity of 1030 acre-feet, it primarily serves the purpose of irrigation in the area. The dam is regulated by the Utah Division of Water Rights and undergoes regular inspections to ensure its structural integrity.

Despite being classified as having a high hazard potential, Yankee Meadow is currently rated in fair condition as of the last assessment in 2014. Its normal storage capacity is 836 acre-feet, serving a drainage area of 2 square miles. The dam spans 450 feet in length and has a maximum discharge capacity of 45 cubic feet per second. While there are no associated structures or outlet gates, the dam continues to play a vital role in the region's water resource management.

Yankee Meadow's location in Parowan, Utah, makes it a crucial component of the local water infrastructure. With its historical significance dating back almost a century, it stands as a testament to the region's commitment to water conservation and irrigation practices. As climate change intensifies, the proper maintenance and regulation of dams like Yankee Meadow will be essential in ensuring sustainable water resource management for future generations.

Year Completed

1926

Dam Length

450

River Or Stream

BOWERY CREEK

Primary Dam Type

Earth

Hydraulic Height

30

Drainage Area

2

Nid Storage

1030

Structural Height

34

Hazard Potential

High

Nid Height

34
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.