Patch Pond Reservoir Report

Last Updated: December 15, 2025

Patch Pond, located in Rutland, Vermont, is a captivating hydroelectric dam built in 1921 with a primary purpose of generating electricity.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, made of concrete and standing at a height of 30 feet, utilizes a Multi-Arch core design with foundations anchored in rock and soil. With a storage capacity of 400 acre-feet and a surface area of 20 acres, Patch Pond plays a significant role in managing water resources in the region.

Despite its age, Patch Pond has a significant hazard potential and is considered to be in "Not Rated" condition. With an inspection frequency of 10 years, the dam poses a potential risk that requires careful monitoring and management. While its emergency action plan and risk assessment details are currently unavailable, the dam serves as a critical infrastructure for both water resource management and climate enthusiasts in the area.

As a public utility structure, Patch Pond contributes to the local economy and energy grid while providing a scenic backdrop for visitors to enjoy. Its location on East Creek, in the New England District, highlights the importance of sustainable water resource management in the face of climate change. With a rich history and ongoing significance in the region, Patch Pond remains a focal point for water resource and climate enthusiasts alike.

Year Completed

1921

Dam Length

390

Dam Height

30

River Or Stream

EAST CREEK

Primary Dam Type

Concrete

Surface Area

20

Hydraulic Height

30

Drainage Area

51

Nid Storage

400

Structural Height

35

Hazard Potential

Significant

Foundations

Rock, Soil

Nid Height

35
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.