France Dam Reservoir Report

Last Updated: December 5, 2025

France Dam, located in Richmond, Virginia, is a privately owned structure regulated by the Department of Conservation and Recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Standing at a height of 43 feet with a length of 350 feet, the dam has a storage capacity of 332.3 acre-feet and a surface area of 14.4 acres. Despite being classified as "Undetermined" in terms of hazard potential and "Not Rated" in condition assessment, the dam is subject to regular inspections to ensure its safety and integrity.

The dam's primary purpose and specific dam type are not specified in the data, but it is known to have been completed at an undisclosed date. With a normal storage capacity of 216 acre-feet, France Dam plays a crucial role in water resource management in the region. While details on spillway type, maximum discharge, and associated structures are not provided, the dam's importance in regulating water flow and protecting downstream areas cannot be understated.

As water resource and climate enthusiasts continue to monitor the impact of dams on ecosystems and communities, France Dam serves as a focal point for understanding the intricate balance between water management and environmental preservation. With ongoing inspections and regulatory oversight, this structure exemplifies the importance of balancing human needs with the protection of natural resources in the face of a changing climate.

Dam Length

350

Dam Height

43

Surface Area

14.4

Hydraulic Height

43

Nid Storage

332.3

Structural Height

43

Hazard Potential

Undetermined

Nid Height

43
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.