Wilson Hollow Slurry Imp Reservoir Report

Last Updated: December 5, 2025

Wilson Hollow Slurry Imp is a private water resource structure located in Monongalia, West Virginia, specifically in the city of Bula.


°F

°F

mph

Wind

%

Humidity

Summary

This tailings dam stands at a height of 197 feet with a length of 1290 feet, providing a storage capacity of 2700 acre-feet. While not regulated by the state, the Mine Safety and Health Administration oversees its operations and inspections to ensure safety and compliance.

With a high hazard potential, Wilson Hollow Slurry Imp poses a significant risk in case of failure, although its current condition assessment is not available. While emergency action plans and risk assessment data are lacking, the structure remains under close monitoring to mitigate potential dangers. Despite the absence of recent inspections or condition updates, efforts are likely ongoing to ensure the dam's integrity and the safety of surrounding areas.

Enthusiasts of water resources and climate change will find Wilson Hollow Slurry Imp an intriguing case study, highlighting the importance of proper management and monitoring of water structures. As a private facility without state regulation, its reliance on federal oversight by the Mine Safety and Health Administration underscores the need for comprehensive safety protocols. The dam's high hazard potential serves as a reminder of the potential risks associated with such structures, prompting further research and awareness in the field of water resource management and climate resilience.

Dam Length

1290

Dam Height

197

Primary Dam Type

Earth

Nid Storage

2700

Hazard Potential

High

Nid Height

197
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.