Elm Ck At Ballinger flow report

Texas, USA USGS #08127000 ↗

As of July 13, 2026, Elm Ck At Ballinger is flowing at 0 cfs with a gage height of 3.36 ft. Source: USGS gauge #08127000, refreshed throughout the day.

Stale data This gauge hasn’t reported in days (last reading unknown). The readings below may not reflect current conditions.
Today high
--
Tonight low
--
Streamflow
--
Gage height
--
Loading current conditions…
Next 24 hours
Loading next 24 hours…
Right now · latest observation
Elm Ck At Ballinger
USGS gauge #08127000
0 cfs streamflow
Latest reading from this gauge.
Gage height
3.36ft
Water temp
--
% of median
Since yesterday
— 0%
Loading streamflow history…
Historical context

How does this compare to past years?

Year-over-year overlay, annual peak discharge, the full distribution of daily flows on record, and the gauge's rating curve.

Detailed forecast

Weather Forecast

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day forecast

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
About this location

Elm Ck At Ballinger

The primary constituents of the flow are surface runoff and groundwater. There are no notable dams or tributaries that significantly affect the flow at this gauge. Seasonally, the flow is highest in the spring due to increased precipitation and snowmelt, and lowest in the summer and fall. Interestingly, Elm Creek is known for its historical significance as an early transportation route for settlers in the area, and it is also home to a variety of fish species, including bass and catfish.

Regional streamflow

Nearby streamflow levels

Cross-check Elm Ck At Ballinger's discharge against nearby gauges to spot whether the change here is local or regional.

Regional snowpack

Nearby snowpack data

Snowpack at SNOTEL stations near Elm Ck At Ballinger. Spring snowmelt is the dominant driver of streamflow in mountain basins -- a deep snowpack upstream means more runoff later in the season.

SNOTEL stationSnowpack
City Water Treatment Plant 0 in
Eden 0 in
Nearby recreation

Plan a trip

Reservoirs, boat launches, river runs, and fishing spots within driving distance of Elm Ck At Ballinger.

River levels & flood safety

Read the level before you go
A river that's runnable at one flow can be deadly at another. Check current discharge and gage height — like the values shown above — against the flood-stage thresholds, and remember levels can spike fast after rain or a dam release.
Respect cold water
Snowmelt rivers run cold even in summer. Sudden immersion triggers cold-water shock and saps strength within minutes. Wear a PFD, dress for the water temperature (not the air), and never wade or paddle alone.
Watch for swiftwater hazards
Strainers (downed trees), undercut rocks, and low-head dams are the deadliest features on moving water. High, fast, muddy water hides them. If in doubt, scout from shore and portage.
Mind flash floods & releases
Narrow canyons can flood from a storm miles upstream, and dam-controlled reaches can rise without warning. Know the forecast, the release schedule, and your exit before you launch.

Track Elm Ck At Ballinger in the Snoflo app

Save this gauge as a favorite, set push alerts when streamflow crosses a threshold (e.g. "alert me when Elm Ck At Ballinger crosses 5,000 cfs"), and Snoflo's iOS app will push the moment USGS reports the crossing.

FAQ

About Elm Ck At Ballinger

Where does the streamflow data for Elm Ck At Ballinger come from?

Discharge, gage height, and water temperature come directly from the USGS streamflow gauge 08127000. Snoflo refreshes the time series throughout the day. Forecasts come from the NOAA / yr.no feed Snoflo's iOS app uses.

How often is the report updated?

USGS gauges report continuously (typically every 15 minutes). Snoflo pulls fresh values throughout the day — look for the "as of" timestamp on the streamflow hero card.

What's the difference between discharge and gage height?

Discharge (cubic feet per second, or cfs) is the volume of water flowing past the gauge each second. Gage height is how high the water sits at the gauge (feet). They're related by a rating curve specific to each gauge — higher water means more flow, but the exact ratio depends on channel shape.

How is "percent of median" calculated?

Today's discharge is compared to the historical median discharge on this calendar day across the gauge's full record. 100% = right on median; 200% = a very high year; 30% = a drought-level low.

What are flood stages, and is this river safe right now?

Flood stages are NWS-defined gage-height thresholds — Action, Minor, Moderate, Major — marking when nearby roads or floodplains start to be affected. "Safe" depends on your activity and skill: a level that's a fun paddle for an expert can be lethal for a wader. Always check the current level against the thresholds above and the safety links, and when in doubt, stay off the water.

Can I get alerts when Elm Ck At Ballinger rises?

Yes — flow alerts are managed in the Snoflo iOS app. Favorite this gauge, set a streamflow threshold (e.g. "alert me when discharge crosses 5,000 cfs"), and you'll get a push the moment USGS reports the crossing.