Albertson Reservoir (Lake) Reservoir Report

Last Updated: December 5, 2025

Albertson Reservoir, also known as Albertson Lake, is a privately owned water body located in Lake County, Oregon.


°F

°F

mph

Wind

%

Humidity

Summary

Its primary purpose is irrigation, and it is regulated by the Oregon Water Resources Department. The reservoir was completed in 1954 and has a dam height of 28 feet, with a storage capacity of 1,600 acre-feet. It covers a surface area of 100 acres and is fed by Willow Creek, North Fork of.

Managed by the Natural Resources Conservation Service, Albertson Reservoir plays a crucial role in supporting agricultural activities in the region. With a low hazard potential and a condition assessment of "Not Rated", the reservoir is deemed safe for operation. The last inspection was conducted in August 2015, and the reservoir is subject to inspections every 6 years to ensure its structural integrity and operational efficiency.

Given its importance for irrigation and water resource management, Albertson Reservoir serves as a valuable asset in the region's water infrastructure. Climate enthusiasts and water resource experts can appreciate the reservoir's contribution to sustainable agriculture and its role in supporting the local community's water needs. Its location in the picturesque landscape of Lake County, Oregon, adds to its charm and significance as a vital water resource in the area.

Year Completed

1954

Dam Length

665

Dam Height

28

River Or Stream

WILLOW CREEK, NORTH FORK OF

Primary Dam Type

Earth

Surface Area

100

Hydraulic Height

26

Drainage Area

3.98

Nid Storage

1600

Structural Height

30

Hazard Potential

Low

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.