Conway Dam No.2 Reservoir Report
Nearby: Conway Dam No. 1 Baker Dam
Last Updated: December 5, 2025
Conway Dam No.2, located in Holmes County, Florida, is a privately owned structure built in 1970 primarily for recreation purposes.
°F
°F
mph
Wind
%
Humidity
Summary
This earth dam stands at a height of 15 feet and spans 350 feet in length, with a storage capacity of 50 acre-feet. Situated on the Bay Branch river, the dam serves irrigation and recreational activities in the area, with a low hazard potential and a condition assessment that is currently not rated.
Despite being last inspected in 1994, Conway Dam No.2 remains regulated and permitted by the state of Florida, ensuring its safety and compliance with environmental standards. The dam's emergency action plan status is unknown, but it boasts a normal storage capacity of 33 acre-feet and a maximum discharge of 498 cubic feet per second. With its picturesque surroundings and vital role in water resource management, Conway Dam No.2 is a significant landmark for water resource and climate enthusiasts in the region.
Year Completed |
1970 |
Dam Length |
350 |
Dam Height |
15 |
River Or Stream |
BAY BRANCH |
Primary Dam Type |
Earth |
Surface Area |
3 |
Hydraulic Height |
15 |
Nid Storage |
50 |
Structural Height |
10 |
Hazard Potential |
Low |
Nid Height |
15 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Choctawhatchee River Nr Pittman
|
2800cfs |
Wrights Creek At Sh 177-A Nr Bonifay
|
96cfs |
Choctawhatchee River At Caryville
|
2830cfs |
Pea River Near Samson Al
|
1490cfs |
Choctawhatchee River Near Bellwood Al
|
1050cfs |
Bruce Creek At Sh 81 Nr Redbay
|
23cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Conway Dam No.2