Williams Lake Dam Reservoir Report

Last Updated: December 13, 2025

Williams Lake Dam, located in Laurens, Georgia, serves multiple purposes including fire protection, stock, and a small fish pond.


°F

°F

mph

Wind

%

Humidity

Summary

Owned privately, the dam was designed by SCS and is classified as an earth dam with a height of 12 feet and a length of 430 feet. With a storage capacity of 86 acre-feet, the dam has a normal storage level of 29 acre-feet and covers a surface area of 9 acres. The dam poses a low hazard potential and has not been rated for condition assessment.

Although the dam is uncontrolled and lacks inspection data, it is considered to have a moderate risk level. Despite the absence of regulatory oversight from the state, the dam has not been listed as a state-jurisdictional or regulated structure. With its primary purpose being fire protection, Williams Lake Dam is an essential resource for the community. Water resource and climate enthusiasts may find interest in the dam's unique design and multifunctional use, making it a valuable asset in maintaining local water resources and ecosystem balance in the region.

Dam Length

430

Dam Height

12

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

9

Drainage Area

230

Nid Storage

86

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.