B. M. Stanley Lake Dam Reservoir Report

Last Updated: December 13, 2025

B.


°F

°F

mph

Wind

%

Humidity

Summary

M. Stanley Lake Dam, located in Laurens, Georgia, was completed in 1982 and serves as a recreational spot for water resource and climate enthusiasts. This private-owned Earth dam stands at 24 feet high and stretches 435 feet in length, with a storage capacity of 76 acre-feet and a surface area of 6 acres. Although the dam has an uncontrolled spillway and outlet gates, its hazard potential is rated low, and its overall condition assessment remains unrated.

Despite not being regulated by the state, B. M. Stanley Lake Dam presents a moderate risk level, with no emergency action plan (EAP) in place. The dam's risk management measures and emergency preparedness are currently not up to guidelines, indicating room for improvement in ensuring the safety and stability of the structure. With its scenic location and potential for outdoor recreation, the dam serves as a reminder of the importance of proactive risk assessment and management in maintaining the integrity of water resource infrastructure in the face of changing climate conditions.

Year Completed

1982

Dam Length

435

Dam Height

24

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

6

Nid Storage

76

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

24
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.