T.A. Bartenfeld Reservoir Report

Last Updated: December 5, 2025

T.A.


°F

°F

mph

Wind

%

Humidity

Summary

Bartenfeld, a private-owned dam located in Fulton County, Georgia, stands at a height of 26.4 feet with a structural height of 11.7 feet. Built with an earth core buttress structure, this dam has a storage capacity of 24 acre-feet and serves a drainage area of 155 square miles. The dam's purpose and completion year remain unknown, but it is crucial to note that it poses a moderate risk level with an undetermined hazard potential.

Although the condition of T.A. Bartenfeld is currently not rated, it is essential to emphasize the need for regular inspections and maintenance to ensure the safety and stability of the structure. With an uncontrolled spillway and outlet gates, the dam's emergency action plan status, risk management measures, and inundation maps preparedness are also unspecified. Climate and water resource enthusiasts should monitor developments regarding this dam to mitigate potential risks and protect the surrounding area from any unforeseen emergencies.

Dam Length

225

Dam Height

26.4

River Or Stream

Unknown

Primary Dam Type

Earth

Surface Area

3.2

Hydraulic Height

11.7

Drainage Area

155

Nid Storage

24

Structural Height

11.7

Outlet Gates

Uncontrolled

Hazard Potential

Undetermined

Foundations

Unlisted/Unknown

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.