Walters Creek Watershed Site 43-1 Reservoir Report
Last Updated: December 13, 2025
Located in Adams County, Iowa, the Walters Creek Watershed Site 43-1 is a crucial water resource managed by the USDA NRCS and regulated by the Iowa DNR.
°F
°F
mph
Wind
%
Humidity
Summary
This earth dam was completed in 1967 and serves multiple purposes, including fire protection, stock, small fish pond, and flood risk reduction. With a dam height of 33 feet and a storage capacity of 50 acre-feet, this site covers a surface area of 4 acres and drains a 0.21 square mile watershed.
Despite its low hazard potential, the dam's condition has not been rated yet. However, the risk assessment indicates a moderate risk level. With no recent inspection data available, it is essential for stakeholders to prioritize regular maintenance and monitoring to ensure the safety and efficiency of this water management structure. As climate change continues to impact water resources, the management and upkeep of sites like Walters Creek Watershed Site 43-1 are paramount to safeguarding local communities and ecosystems.
Year Completed |
1967 |
Dam Length |
540 |
Dam Height |
33 |
River Or Stream |
TR-KEMP CREEK |
Primary Dam Type |
Earth |
Surface Area |
4 |
Drainage Area |
0.21 |
Nid Storage |
50 |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
33 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Walters Creek Watershed Site 43-1