Lake Sherwood Dam No 2 Reservoir Report

Last Updated: December 14, 2025

Lake Sherwood Dam No 2, located in Wesley Chapel, Kentucky, is a privately owned earth dam completed in 1973 for the primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

With a height of 27 feet and a length of 270 feet, this dam has a storage capacity of 43 acre-feet and a surface area of 2.7 acres. It is situated on Pattons Creek and falls under the regulatory authority of the Kentucky Division of Water.

Although categorized as having a low hazard potential, Lake Sherwood Dam No 2 has a moderate risk assessment rating. The dam has not been inspected since May 2006, with an inspection frequency of 5 years. The condition assessment is currently not rated, and there is no information available on emergency action plans or risk management measures in place.

Water resource and climate enthusiasts may find interest in exploring the recreational opportunities offered by Lake Sherwood Dam No 2 while also considering the need for updated inspections and potential risk management strategies to ensure the safety and longevity of this dam structure in Trimble County, Kentucky.

Year Completed

1973

Dam Length

270

Dam Height

27

River Or Stream

PATTONS CREEK

Primary Dam Type

Earth

Surface Area

2.7

Drainage Area

0.06

Nid Storage

43

Hazard Potential

Low

Nid Height

27
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.