Toledo Bend Saddle Dike 2 Reservoir Report

Last Updated: December 21, 2025

Toledo Bend Saddle Dike 2, located in Burr Ferry, Louisiana, is a crucial structure that plays a significant role in hydroelectric power generation, navigation, recreation, and water supply.


°F

°F

mph

Wind

%

Humidity

Summary

Designed by Forrest and Cotton, Inc., the dike stands at a structural height of 75 feet, with a dam height of 55 feet and a hydraulic height of 52 feet. Completed in 1966, the dike has a storage capacity of 5,097,500 acre-feet and a surface area of 182,490 acres, serving as a vital water resource for the region.

With its high hazard potential and risk assessment rating of 2, Toledo Bend Saddle Dike 2 is closely monitored by the Federal Energy Regulatory Commission for inspections and regulatory compliance. While its condition assessment is currently listed as not available, the dike is associated with two other structures and undergoes regular inspections every year. The emergency action plan for the dike was last revised in December 2020, ensuring that necessary measures are in place to address any potential risks or emergencies.

As part of the Galveston District, Toledo Bend Saddle Dike 2 stands as a key component in the water management infrastructure of the area, providing essential services and resources for both the local community and the surrounding environment. The dam's earth core type, stone foundation, and extensive length of 1,170 feet demonstrate its robust construction and long-standing contribution to water resource management in the region.

Year Completed

1966

Dam Length

1170

Dam Height

55

River Or Stream

Sabine

Surface Area

182490

Hydraulic Height

52

Drainage Area

7190

Nid Storage

5097500

Structural Height

75

Hazard Potential

High

Foundations

Soil

Nid Height

75
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.