Amite River Industries Number 2 Dam Reservoir Report
Last Updated: December 5, 2025
The Amite River Industries Number 2 Dam, located in Brookside, Mississippi, was completed in 1965 and is owned by a private entity.
°F
°F
mph
Wind
%
Humidity
Summary
This earth dam, with a height of 14 feet, serves primarily for recreation purposes along the Amite River West Fork. Designed by the USDA NRCS, the dam is regulated by the Mississippi Department of Environmental Quality and has a low hazard potential.
With a storage capacity of 90 acre-feet, the dam features an uncontrolled spillway and outlet gates. Although not currently rated for its condition, the dam poses a moderate risk and is subject to regular state inspection and enforcement measures. The surrounding area of Amite, Mississippi, benefits from this structure for recreational activities and water resource management, making it an important asset for the community and climate enthusiasts alike.
Year Completed |
1965 |
Dam Height |
14 |
River Or Stream |
AMITE RIVER W FORK |
Primary Dam Type |
Earth |
Nid Storage |
90 |
Outlet Gates |
Uncontrolled |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
14 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Homochitto River At Eddiceton
|
168cfs |
Homochitto River At Rosetta
|
2130cfs |
Tickfaw River At Liverpool
|
44cfs |
Tangipahoa River At Osyka
|
478cfs |
Amite River Near Darlington
|
267cfs |
Bogue Chitto Nr Tylertown
|
578cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Amite River Industries Number 2 Dam