Hoover Lake Dam Reservoir Report

Last Updated: December 12, 2025

Hoover Lake Dam, located in Rankin, Mississippi, is a privately owned structure that serves primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1950, this earth dam stands at a height of 21 feet and has a length of 1170 feet, creating a reservoir with a normal storage capacity of 239 acre-feet. The dam is situated on the UNT of French Branch, approximately 1.5 miles from the city of Florence.

Managed by the Mississippi Department of Environmental Quality, Hoover Lake Dam is subject to state regulations, inspections, and enforcement to ensure its safety and compliance. The dam's hazard potential is classified as high, however, its condition assessment has been rated as satisfactory. Despite being classified as having a moderate risk level, the dam has a history of regular inspections and its emergency action plan is in place to address any potential risks or incidents effectively.

Hoover Lake Dam's presence not only provides a recreational area for locals and visitors but also serves as a vital component of water resource management in the region. Water enthusiasts and climate advocates can appreciate the careful monitoring and maintenance efforts that go into ensuring the safety and functionality of this important infrastructure.

Year Completed

1950

Dam Length

1170

Dam Height

21

River Or Stream

UNT OF FRENCH BRANCH

Primary Dam Type

Earth

Surface Area

27.6

Drainage Area

0.22

Nid Storage

378

Structural Height

21

Outlet Gates

None

Hazard Potential

High

Nid Height

21
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.