Henry # 1 Lake Dam Reservoir Report

Last Updated: December 6, 2025

Henry # 1 Lake Dam is a private dam located in Scott, Mississippi, along the Big Black River.


°F

°F

mph

Wind

%

Humidity

Summary

Constructed in 2015 by FC&E Engineering, this earth dam serves the primary purpose of containing tailings. With a maximum storage capacity of 125 acre-feet and a normal storage level of 90.3 acre-feet, the dam stands at a height of 30 feet and has a structural height of 35 feet.

The dam has a low hazard potential and is rated as "Not Rated" in terms of its condition assessment. Despite not being state-regulated or inspected, the risk assessment for Henry # 1 Lake Dam is moderate (3). The dam features an uncontrolled spillway and a drainage area of 0.33 square miles, with a surface area of 4.8 acres. While lacking emergency action plans and inundation maps, the dam is equipped to handle a maximum discharge of 113.7 cubic feet per second.

Overall, Henry # 1 Lake Dam presents an interesting case study for water resource and climate enthusiasts, showcasing the complexities of private dam ownership and the importance of risk management in maintaining these critical infrastructure assets. With its unique characteristics and design parameters, this dam serves as a reminder of the diverse range of structures that contribute to our water resource management systems.

Year Completed

2015

Dam Length

927

Dam Height

30

River Or Stream

BIG BLACK RIVER

Surface Area

4.8

Hydraulic Height

25

Drainage Area

0.33

Nid Storage

125

Structural Height

35

Hazard Potential

Low

Nid Height

35
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.