Kelso #1 Reservoir Report
Nearby: Chicken Of The Sea Gilda Radner
Last Updated: December 5, 2025
Kelso #1 is a privately owned earth dam located in Malta, Montana, specifically in Phillips County.
°F
°F
mph
Wind
%
Humidity
Summary
Completed in 1930, this dam serves multiple purposes including fire protection, stock watering, and small fish pond maintenance. With a dam height of 15 feet and a length of 450 feet, Kelso #1 has a storage capacity of 138 acre-feet, with a normal storage level of 54 acre-feet. The dam is situated on TR-Wilson Coulee, which is a tributary of the Missouri River.
Managed by the Montana Department of Natural Resources and Conservation (DNRC), Kelso #1 has a low hazard potential and is currently not rated for its condition assessment. Despite its age, the dam has not been modified, and its inspection frequency, emergency action plan (EAP) status, and risk assessment information are not currently available. The dam is not under the jurisdiction of the US Army Corps of Engineers and has not been assigned a Dam Safety Action Classification (DSAC) date. Kelso #1 represents a significant part of Montana's water resource infrastructure for fire protection and agricultural needs in the area.
Year Completed |
1930 |
Dam Length |
450 |
Dam Height |
15 |
River Or Stream |
TR-WILSON COULEE |
Primary Dam Type |
Earth |
Hydraulic Height |
15 |
Nid Storage |
138 |
Hazard Potential |
Low |
Nid Height |
15 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Kelso #1