Tonn #2 Reservoir Report
Nearby: Pine Hills Hanson #1
Last Updated: December 6, 2025
Tonn #2, located in Miles City, Montana, serves multiple purposes including fire protection, stock watering, and as a small fish pond.
°F
°F
mph
Wind
%
Humidity
Summary
This private earth dam, completed in 1960, stands at 15 feet in height with a length of 300 feet. It has a storage capacity of 51 acre-feet, with a normal storage level of 19 acre-feet. Situated on TR-Jack Creek, this dam is regulated by the Montana Department of Natural Resources and Conservation (DNRC) and is under state jurisdiction for permitting, inspection, and enforcement.
Despite being classified as having a low hazard potential, Tonn #2 has not been rated for its condition assessment. Emergency action plans and risk assessment measures are yet to be determined for this structure. With no recent inspection data available, the current condition of the dam remains unknown. The dam's location in a sparsely populated area may contribute to the low risk associated with its potential failure. However, further evaluation and monitoring of Tonn #2 are necessary to ensure its safety and functionality for the surrounding community and environment.
Year Completed |
1960 |
Dam Length |
300 |
Dam Height |
15 |
River Or Stream |
TR-JACK CREEK |
Primary Dam Type |
Earth |
Hydraulic Height |
15 |
Nid Storage |
51 |
Hazard Potential |
Low |
Nid Height |
15 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Tonn #2