Summary
Completed in 1978 by the USDA NRCS, this dam serves multiple purposes including fire protection, stock, and a small fish pond. With a height of 20 feet and a storage capacity of 65 acre-feet, Morton #1 is situated on the TR-Cartersville Canal and has a drainage area of 1.02 square miles.
This dam has a low hazard potential and is currently rated as "Not Rated" in terms of its condition assessment. While it is not under the jurisdiction of any federal agency, it is regulated by the Montana Department of Natural Resources and Conservation (DNRC). With a maximum discharge capacity of 550 cubic feet per second, Morton #1 features an uncontrolled spillway with a width of 40 feet, ensuring the safety and stability of the structure.
With its moderate risk assessment rating and moderate risk management measures in place, Morton #1 provides essential water resource management for the surrounding area. Its strategic location and design make it a valuable asset for fire protection, livestock, and recreational purposes, highlighting the importance of sustainable water infrastructure in mitigating the impacts of climate change.
Year Completed |
1978 |
Dam Length |
150 |
Dam Height |
20 |
River Or Stream |
TR-CARTERSVILLE CANAL |
Primary Dam Type |
Earth |
Hydraulic Height |
20 |
Drainage Area |
1.02 |
Nid Storage |
65 |
Hazard Potential |
Low |
Nid Height |
20 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Morton #1