Adams #3 dam
Adams #3
Adams #3, located in Rosebud, Montana, is a private earth dam built in 1952 by the USDA NRCS for fire protection, stock, and small fish pond purposes. With a dam height of 17 feet and a length of 300 feet, it has a storage capacity of 70 acre-feet and covers a surface area of 1.41 acres. Situated on the Fast Fork Horse Creek, this structure is regulated by the DNRC and falls under the jurisdiction of the state of Montana.
Despite being labeled with a low hazard potential, Adams #3 is considered to have a moderate risk level. The dam has not been rated for its condition, and there is no current assessment available. However, the structure meets state regulatory requirements for permitting, inspection, and enforcement. Although no emergency action plan (EAP) has been prepared or updated for this dam, it is important for stakeholders and local authorities to stay informed about the risk management measures in place for potential emergencies.
In the event of any modifications or improvements to Adams #3, it is essential that all stakeholders are involved in the decision-making process to ensure the safety and integrity of the dam. With its strategic location for fire protection and water resource management, Adams #3 plays a crucial role in the local ecosystem and should be monitored and maintained regularly to prevent any potential risks or hazards.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Adams #3 -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Yellowstone River At Forsyth Mt | 10,500 cfs | → |
| Yellowstone River At Miles City Mt | 10,600 cfs | → |
| Tongue River At Miles City Mt | 61 cfs | → |
| Pumpkin Creek Near Miles City Mt | 0 cfs | → |
| Tongue R Bl Brandenberg Bridge Nr Ashland Mt | 223 cfs | → |
| Bighorn River Ab Tullock Cr Nr Bighorn Mt | 2,040 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Adams #3.
Track Adams #3 in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Adams #3
Where does the data for Adams #3 come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.