Taylor #2 dam
Taylor #2
Taylor #2 is a private water structure located in Garfield, Montana, along Coleman Coulee. Completed in 1979, this earth dam stands at a height of 45 feet and serves multiple purposes, including fire protection, stock watering, and small fish pond management. With a storage capacity of 376 acre-feet, Taylor #2 is regulated by the Montana Department of Natural Resources and Conservation (DNRC) and is subject to state permitting, inspection, and enforcement.
Despite its low hazard potential and ungraded condition assessment, Taylor #2 plays a crucial role in water resource management in the region. The dam's location in a remote area with no associated structures or nearby city underscores its importance for local fire protection and agricultural needs. With a primary owner being private, Taylor #2 stands as a testament to sustainable water resource development and management in Montana.
Climate and water enthusiasts will find Taylor #2 an intriguing example of how private ownership and state regulation intersect to ensure the sustainable use of water resources for multiple purposes. Situated in a scenic area with minimal risk, this earth dam embodies the balance between human needs and environmental conservation in water management practices. As climate change continues to impact water availability, structures like Taylor #2 play a vital role in securing water sources for future generations.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Taylor #2 -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Nelson Creek Near Van Norman Mt | 4 cfs | → |
| Yellowstone River At Miles City Mt | 12,500 cfs | → |
| Redwater River At Circle Mt | 14 cfs | → |
| Tongue River At Miles City Mt | 66 cfs | → |
| Yellowstone River At Forsyth Mt | 12,300 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Taylor #2.
Campgrounds
See all →
About Taylor #2
Where does the data for Taylor #2 come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card below for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.