Dean S #2 Reservoir Report
Nearby: Circle Reservoir Johnston
Last Updated: December 6, 2025
Dean S #2 is a state-regulated earth dam located in Poplar, Montana, along the TR-Red Water river.
°F
°F
mph
Wind
%
Humidity
Summary
Completed in 1946, this dam serves multiple purposes including fire protection, stock, and small fish pond management. With a height of 20 feet and a length of 800 feet, the dam has a storage capacity of 125 acre-feet.
Owned by the state of Montana and regulated by the Department of Natural Resources and Conservation (DNRC), Dean S #2 has a low hazard potential and is currently rated as "Not Rated" in terms of condition assessment. Despite not having a designated inspection frequency or last inspection date on record, the dam meets state permitting and inspection requirements, ensuring its functionality and safety for the surrounding area.
Located in Dawson County, Montana, Dean S #2 plays a vital role in water resource management and climate resilience in the region. With its primary purpose being fire protection and stock management, this dam serves as a key infrastructure for maintaining water resources and supporting local agricultural activities in the area.
Year Completed |
1946 |
Dam Length |
800 |
Dam Height |
20 |
River Or Stream |
TR-RED WATER |
Primary Dam Type |
Earth |
Hydraulic Height |
20 |
Nid Storage |
125 |
Hazard Potential |
Low |
Nid Height |
20 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Dean S #2