Dam Report

Stark Dam dam

Montana, USA Tr-Beaver Creek Hazard Low
Today high
--
Tonight low
--
Dam height
20ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Stark Dam -- None dam
Stark Dam None · Tr-Beaver Creek
About this dam

Stark Dam

Stark Dam, located in Wibaux, Montana, along TR-Beaver Creek, was completed in 1945 with a primary purpose of providing fire protection, stock, and a small fish pond. This earth dam stands at 20 feet in height and spans a length of 300 feet, with a storage capacity of 264 acre-feet. Owned privately, Stark Dam is regulated by the Montana Department of Natural Resources and Conservation (DNRC), with state jurisdiction, permitting, inspection, and enforcement in place to ensure its safety and compliance with regulations.

Despite its low hazard potential and current "Not Rated" condition assessment, Stark Dam plays a crucial role in water resource management in Fallon County, Montana. With a normal storage capacity of 33 acre-feet, the dam serves as a vital source of water for fire protection and livestock use in the area. Its strategic location and design make it a valuable asset for local communities and wildlife, contributing to the overall ecosystem health and sustainability in the region.

As climate change continues to impact water resources globally, Stark Dam stands as a testament to the importance of responsible water management practices. With its historical significance and functional purpose, this earth dam serves as a symbol of resilience and adaptability in the face of evolving environmental challenges. Enthusiasts and stakeholders alike can appreciate Stark Dam not only for its practical benefits but also for its contribution to the broader conversation on water conservation and climate resilience.

StateNone
River / streamTr-Beaver Creek
NID IDMT03182
Owner typePrivate
Primary purposeFire Protection, Stock, Or Small Fish Pond
Dam typeEarth
Year built1945
Dam height20 ft
Dam length300 ft
Max storage264 AF
Normal storage33 AF
Hazard potentialLow
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Stark Dam -- inflows here typically show up in storage 24-72 hours later.

Track Stark Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Stark Dam

Where does the data for Stark Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Stark Dam.

Premium feature

Favorites and alerts are part of Snoflo Premium. Save reservoirs, set storage thresholds, and get push notifications when conditions cross.

Upgrade to Premium Not now
🔔

Manage alerts in the Snoflo app

Custom alerts are configured in the iOS app -- favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

Open App Store